神剑山庄资源网 Design By www.hcban.com

在cloudstack4.5.2版本下,偶尔出现libvirtd服务无响应的情况,导致virsh命令无法使用,同时伴随cloudstack master丢失该slave主机连接的情况。最初怀疑是libvirtd服务或版本的问题,经过分析和排查最终确定是cloudstack-agent的问题。但是在官网上并没有找到类似的bug提交,该问题可能还存在于更高的版本,需要时间进一步从根本上分析。下面是该问题的处理过程,在此记录下,关注和使用cloudstack的朋友可以参考。

众所周知,cloudstack的社区热度远不如openstack,为什么还要选择clcoudstack?这个问题以后有机会再和大家聊。言归正传。

环境交代

宿主机操作系统:centos6.5x64(2.6.32-431.el6.x86_64)
cloudstack版本:4.5.2
libvirt版本:libvirt-0.10.2-54.el6_7.2.x86_64

问题描述

通过cloudstackapi listHosts报警信息显示:
node5.cloud.rtmap:192.168.14.20 state is Down at 2016-05-13T07:19:04+0800
#有关cloudstackapi的使用方法在其它文章中总结,不在此处说明。

登陆问题宿主服务器检查:

[root@node5 log]#virsh list --all

没有响应ctrl^c退出

这时的vm可以正常工作,但处于失控状态

尝试重启启动libvirtd服务:

[root@node5 log]# service libvirtd stop

正在关闭 libvirtd 守护进程:                               [失败]  #无法关闭libvirtd服务

尝试重启启动cloudstack-agent服务:

[root@node5 libvirt]# service cloudstack-agent restart
Stopping Cloud Agent: 
Starting Cloud Agent: 

libvirtd故障依旧

简单维护

[root@node5 ping]# libvirtd -d -l --config /etc/libvirt/libvirtd.conf 

libvirtd:错误:Unable to initialize network sockets。查看 /var/log/messages 或者运行不带 --daemon 的命令查看更多信息。

[root@node5 log]# libvirtd -d

可以执行成功,这时执行virsh list --all 可以查看和操作vm

[root@node5 log]#virsh list --all
Id  名称             状态
----------------------------------------------------
 2   i-4-185-VM           running

虽然vm运行正常,现在也可以通过命令正常管理了。但是对于cloudstack平台而言,宿主机处于down状态,vm处于失控状态。

临时解决办法是在其它大的升级和维护过程中重启服务器解决,根本解决还要具体问题具体分析。

分析与排查

检查进程

[root@node5 log]# ps ax |grep libvirtd
 6485 "htmlcode">
[root@node5 log]# top -p 6485
top -p 6485
top - 09:19:41 up 12 days, 22:27, 1 user, load average: 3.05, 5.07, 6.64
Tasks:  1 total,  0 running,  1 sleeping,  0 stopped,  0 zombie
Cpu(s): 4.8%us, 1.4%sy, 0.0%ni, 93.1%id, 0.6%wa, 0.0%hi, 0.1%si, 0.0%st
Mem: 264420148k total, 182040780k used, 82379368k free,  834232k buffers
Swap: 8388600k total,    92k used, 8388508k free, 100453708k cached

  PID USER   PR NI VIRT RES SHR S %CPU %MEM  TIME+ COMMAND
 6485 root   20  0 984m 12m 4440 R 100.2 0.0 844:22.68 libvirtd       #cpu占用100%,无法释放,影响系统稳定性

杀进程

[root@node5 log]# kill -9 6485
[root@node5 log]# kill -9 6485
[root@master log]# ps ax |grep libvirtd  #检查进程依然存在
 6485 "htmlcode">
[root@node5 log]#strace -f libvirtd
[pid 107570] close(23058)        = -1 EBADF (Bad file descriptor)
[pid 107570] close(23059)        = -1 EBADF (Bad file descriptor)
[pid 107570] close(23060)        = -1 EBADF (Bad file descriptor)
[pid 107570] close(23061)        = -1 EBADF (Bad file descriptor)
[pid 107570] close(23062)        = -1 EBADF (Bad file descriptor)
[pid 107570] close(23063)        = -1 EBADF (Bad file descriptor)
[pid 107570] close(23064)        = -1 EBADF (Bad file descriptor)
[pid 107570] close(23065)        = -1 EBADF (Bad file descriptor)
[pid 107570] close(23066)        = -1 EBADF (Bad file descriptor)
[pid 107570] close(23067)        = -1 EBADF (Bad file descriptor)
[pid 107570] close(23068)        = -1 EBADF (Bad file descriptor)
[pid 107570] close(23069)        = -1 EBADF (Bad file descriptor)
[pid 107570] close(23070)        = -1 EBADF (Bad file descriptor)
[pid 107570] close(23071)        = -1 EBADF (Bad file descriptor)
^C[pid 107570] close(23072 <unfinished ...>
Process 107559 detached
Process 107560 detached
Process 107561 detached
Process 107562 detached
Process 107563 detached
Process 107564 detached
Process 107565 detached
Process 107566 detached
Process 107567 detached
Process 107568 detached
Process 107569 detached
Process 107570 detached

父进程6485在不断的产生和关闭子进程,并返回错误信息。Bad file descriptor的原因(如何触发的,谁触发的)? 循环为何无法退出?问题如何再现?

获得更多的线索

官方文档(libvirtd各种故障诊断记录和解决办法非常详尽)
https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/7/html/Virtualization_Deployment_and_Administration_Guide/sect-Troubleshooting-Common_libvirt_errors_and_troubleshooting.html#sect-libvirtd_failed_to_start

开启系统日志

Change libvirt's logging in /etc/libvirt/libvirtd.conf by enabling the line below. To enable the setting the line, open the /etc/libvirt/libvirtd.conf file in a text editor, remove the hash (or #) symbol from the beginning of the following line, and save the change:
log_outputs="3:syslog:libvirtd"

参照配置,重启服务器等待下次故障观察日志

......

Jun 1 12:42:26 node5 abrtd: New client connected
Jun 1 12:42:26 node5 abrtd: Directory 'pyhook-2016-06-01-12:42:26-70065' creation detected
Jun 1 12:42:26 node5 abrt-server[70066]: Saved Python crash dump of pid 70065 to /var/spool/abrt/pyhook-2016-06-01-12:42:26-70065
Jun 1 12:42:26 node5 abrtd: Package 'cloudstack-common' isn't signed with proper key
Jun 1 12:42:26 node5 abrtd: 'post-create' on '/var/spool/abrt/pyhook-2016-06-01-12:42:26-70065' exited with 1
Jun 1 12:42:26 node5 abrtd: Deleting problem directory '/var/spool/abrt/pyhook-2016-06-01-12:42:26-70065'
Jun 1 12:43:26 node5 abrt: detected unhandled Python exception in '/usr/share/cloudstack-common/scripts/vm/network/security_group.py'
......

Jun 6 10:36:21 node5 libvirtd: 102840: warning : qemuDomainObjBeginJobInternal:878 : Cannot start job (modify, none) for domain i-4-30-VM; current job is (modify, none) owned by (102925, 0)
Jun 6 10:36:21 node5 libvirtd: 102840: error : qemuDomainObjBeginJobInternal:883 : Timed out during operation: cannot acquire state change lock
Jun 6 10:39:59 node5 libvirtd: 114071: info : libvirt version: 0.10.2, package: 54.el6_7.2 (CentOS BuildSystem <http://bugs.centos.org>, 2015-11-10-10:25:08, c6b9.bsys.dev.centos.org)
Jun 6 10:39:59 node5 libvirtd: 114071: error : virNetSocketNewListenTCP:312 : Unable to bind to port: 地址已在使用
Jun 6 10:40:46 node5 libvirtd: 114147: info : libvirt version: 0.10.2, package: 54.el6_7.2 (CentOS BuildSystem <http://bugs.centos.org>, 2015-11-10-10:25:08, c6b9.bsys.dev.centos.org)
Jun 6 10:40:46 node5 libvirtd: 114147: error : virNetSocketNewListenTCP:312 : Unable to bind to port: 地址已在使用
Jun 6 10:42:15 node5 libvirtd: 114204: info : libvirt version: 0.10.2, package: 54.el6_7.2 (CentOS BuildSystem <http://bugs.centos.org>, 2015-11-10-10:25:08, c6b9.bsys.dev.centos.org)
Jun 6 10:42:15 node5 libvirtd: 114204: error : virNetSocketNewListenTCP:312 : Unable to bind to port: 地址已在使用
Jun 6 10:47:05 node5 libvirtd: 114375: info : libvirt version: 0.10.2, package: 54.el6_7.2 (CentOS BuildSystem <http://bugs.centos.org>, 2015-11-10-10:25:08, c6b9.bsys.dev.centos.org)
Jun 6 10:47:05 node5 libvirtd: 114375: error : virNetSocketNewListenTCP:312 : Unable to bind to port: 地址已在使用
Jun 6 10:47:23 node5 libvirtd: 114412: info : libvirt version: 0.10.2, package: 54.el6_7.2 (CentOS BuildSystem <http://bugs.centos.org>, 2015-11-10-10:25:08, c6b9.bsys.dev.centos.org)
Jun 6 10:47:23 node5 libvirtd: 114412: error : virNetSocketNewListenTCP:312 : Unable to bind to port: 地址已在使用
......

Jun 12 03:08:02 node5 rsyslogd: [origin software="rsyslogd" swVersion="5.8.10" x-pid="3111" x-info="http://www.rsyslog.com"] rsyslogd was HUPed
Jun 12 09:20:40 node5 libvirtd: 72575: info : libvirt version: 0.10.2, package: 54.el6_7.2 (CentOS BuildSystem <http://bugs.centos.org>, 2015-11-10-10:25:08, c6b9.bsys.dev.centos.org)
Jun 12 09:20:40 node5 libvirtd: 72575: error : virPidFileAcquirePath:410 : Failed to acquire pid file '/var/run/libvirtd.pid': 资源暂时不可用

并未获得致命错误和更多线索。(该日志配置选项还是很有必要打开的,很多问题都可以通过它来定位)

解决过程

解决思路

尝试和找到终止进程、重启服务的方法
提交bug,等待补丁升级
分析源代码,再现问题,解决问题(投入研发和时间)
由于不能再现问题,还是从简入繁吧。触发这些子进程的元凶是谁?还是cloudstack-agent的嫌疑最大,但之前重启过该服务并没有解决问题,那么agent服务是怎么一回事呢?

看下启动脚本可以基本了解,

[root@node5 libvirt]# cat /etc/rc.d/init.d/cloudstack-agent

#!/bin/bash

# chkconfig: 35 99 10
# description: Cloud Agent

# Licensed to the Apache Software Foundation (ASF) under one
# or more contributor license agreements. See the NOTICE file
# distributed with this work for additional information
# regarding copyright ownership. The ASF licenses this file
# to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance
# with the License. You may obtain a copy of the License at
#
#  http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing,
# software distributed under the License is distributed on an
# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
# KIND, either express or implied. See the License for the
# specific language governing permissions and limitations
# under the License.

# WARNING: if this script is changed, then all other initscripts MUST BE changed to match it as well

. /etc/rc.d/init.d/functions

# set environment variables

SHORTNAME=$(basename $0 | sed -e 's/^[SK][0-9][0-9]//')
PIDFILE=/var/run/"$SHORTNAME".pid
LOCKFILE=/var/lock/subsys/"$SHORTNAME"
LOGDIR=/var/log/cloudstack/agent
LOGFILE=${LOGDIR}/agent.log
PROGNAME="Cloud Agent"
CLASS="com.cloud.agent.AgentShell"
JSVC=`which jsvc 2>/dev/null`;

# exit if we don't find jsvc
if [ -z "$JSVC" ]; then
  echo no jsvc found in path;
  exit 1;
fi

unset OPTIONS
[ -r /etc/sysconfig/"$SHORTNAME" ] && source /etc/sysconfig/"$SHORTNAME"

# The first existing directory is used for JAVA_HOME (if JAVA_HOME is not defined in $DEFAULT)
JDK_DIRS="/usr/lib/jvm/jre /usr/lib/jvm/java-7-openjdk /usr/lib/jvm/java-7-openjdk-i386 /usr/lib/jvm/java-7-openjdk-amd64 /usr/lib/jvm/java-6-openjdk /usr/lib/jvm/java-6-openjdk-i386 /usr/lib/jvm/java-6-openjdk-amd64 /usr/lib/jvm/java-6-sun"

for jdir in $JDK_DIRS; do
  if [ -r "$jdir/bin/java" -a -z "${JAVA_HOME}" ]; then
    JAVA_HOME="$jdir"
  fi
done
export JAVA_HOME

ACP=`ls /usr/share/cloudstack-agent/lib/*.jar | tr '\n' ':' | sed s'/.$//'`
PCP=`ls /usr/share/cloudstack-agent/plugins/*.jar 2>/dev/null | tr '\n' ':' | sed s'/.$//'`

# We need to append the JSVC daemon JAR to the classpath
# AgentShell implements the JSVC daemon methods
export CLASSPATH="/usr/share/java/commons-daemon.jar:$ACP:$PCP:/etc/cloudstack/agent:/usr/share/cloudstack-common/scripts"

start() {
  echo -n $"Starting $PROGNAME: "
  if hostname --fqdn >/dev/null 2>&1 ; then
    $JSVC -Xms256m -Xmx2048m -cp "$CLASSPATH" -pidfile "$PIDFILE"       -errfile $LOGDIR/cloudstack-agent.err -outfile $LOGDIR/cloudstack-agent.out $CLASS
    RETVAL=$"$PROGNAME". > /dev/stderr
    RETVAL=9
  fi
  [ $RETVAL = 0 ] && touch ${LOCKFILE}
  return $RETVAL
}

stop() {
  echo -n $"Stopping $PROGNAME: "
  $JSVC -pidfile "$PIDFILE" -stop $CLASS
  RETVAL=$"$1" in
  start)
    start
    ;;
  stop)
    stop
    ;;
  status)
    status -p ${PIDFILE} $SHORTNAME
    RETVAL=$"Usage: $SHORTNAME {start|stop|restart|condrestart|status|help}"
  RETVAL=3
esac

exit $RETVAL

[root@node5 libvirt]# ps ax |grep jsvc.exec
 6655 "htmlcode">
[root@node5 bin]# service cloudstack-agent status
cloudstack-agent (pid 6657) 正在运行...
[root@node5 bin]# service cloudstack-agent stop
Stopping Cloud Agent:

[root@node5 bin]# service cloudstack-agent status
cloudstack-agent (pid 6657) 正在运行..

ps ax |grep jsvc.exec 也验证了进程依然存在

眼前一亮的同时,也发现了之前使用restart带来的问题,stop不成功的问题被掩盖了~~~有没有懊恼? 不过来不及反思,接下来的问题还远不是这么简单......

[root@node5 bin]# kill -9 6655 6657
[root@node5 bin]# kill -9 6655 6657
-bash: kill: (6655) - 没有那个进程
-bash: kill: (6657) - 没有那个进程
[root@node5 bin]# service cloudstack-agent status
cloudstack-agent 已死,但 pid 文件仍存
[root@node5 bin]# rm /var/run/cloudstack-agent.pid
rm:是否删除普通文件 "/var/run/cloudstack-agent.pid"?y
[root@node5 bin]# service cloudstack-agent status
cloudstack-agent 已死,但是 subsys 被锁
[root@node5 bin]# service cloudstack-agent start
[root@node5 bin]# service cloudstack-agent status
cloudstack-agent (pid 109382) 正在运行...
[root@node5 bin]# netstat -antp |grep 8250
tcp    0   0 192.168.14.20:22220     192.168.14.10:8250     ESTABLISHED 109382/jsvc.exec 

处理后状态恢复正常,但是libvirtd仍然无法杀掉, 很快netstat -antp |grep 8250 状态再次消失,cloudstack master平台监控主机记录由Up状态转为disconnect状态。不过毕竟不是down状态,较之前已经有了进步。

启动一个libvirtd -d看下,

[root@node5 bin]# libvirtd -d
[root@node5 bin]# ps ax |grep libvirtd
  6485 "htmlcode">
[root@node5 bin]# libvirtd -d
[root@node5 bin]# ps ax |grep libvirtd
 130057 ?    Sl   0:38 libvirtd -d
 28904 pts/0   S+   0:00 grep libvirtd

至此既恢复了平台对该主机的管控,也终止了libvirtd异常进程。问题初步归于cloudstack-agent在处理发送个libvirtd的信号上存在些小问题。以后再单独分析下jsvc进程,再现问题和根本解决。

问题反思

在处理服务异常的问题上,命令行参数不要用restart,用stop和kill来调试。说起来都是泪!

标签:
cloudstack ,cloudstack,安装,cloudstack,libvirtd服务无响应

神剑山庄资源网 Design By www.hcban.com
神剑山庄资源网 免责声明:本站文章均来自网站采集或用户投稿,网站不提供任何软件下载或自行开发的软件! 如有用户或公司发现本站内容信息存在侵权行为,请邮件告知! 858582#qq.com
神剑山庄资源网 Design By www.hcban.com

评论“cloudstack下libvirtd服务无响应问题”

暂无cloudstack下libvirtd服务无响应问题的评论...

《魔兽世界》大逃杀!60人新游玩模式《强袭风暴》3月21日上线

暴雪近日发布了《魔兽世界》10.2.6 更新内容,新游玩模式《强袭风暴》即将于3月21 日在亚服上线,届时玩家将前往阿拉希高地展开一场 60 人大逃杀对战。

艾泽拉斯的冒险者已经征服了艾泽拉斯的大地及遥远的彼岸。他们在对抗世界上最致命的敌人时展现出过人的手腕,并且成功阻止终结宇宙等级的威胁。当他们在为即将于《魔兽世界》资料片《地心之战》中来袭的萨拉塔斯势力做战斗准备时,他们还需要在熟悉的阿拉希高地面对一个全新的敌人──那就是彼此。在《巨龙崛起》10.2.6 更新的《强袭风暴》中,玩家将会进入一个全新的海盗主题大逃杀式限时活动,其中包含极高的风险和史诗级的奖励。

《强袭风暴》不是普通的战场,作为一个独立于主游戏之外的活动,玩家可以用大逃杀的风格来体验《魔兽世界》,不分职业、不分装备(除了你在赛局中捡到的),光是技巧和战略的强弱之分就能决定出谁才是能坚持到最后的赢家。本次活动将会开放单人和双人模式,玩家在加入海盗主题的预赛大厅区域前,可以从强袭风暴角色画面新增好友。游玩游戏将可以累计名望轨迹,《巨龙崛起》和《魔兽世界:巫妖王之怒 经典版》的玩家都可以获得奖励。