神剑山庄资源网 Design By www.hcban.com

1 什么是RAID

RAID全称是独立磁盘冗余阵列(Redundant Array of Independent Disks),基本思想是把多个磁盘组合起来,组合一个磁盘阵列组,使得性能大幅提高。

RAID分为几个不同的等级,各个不同的等级均在数据可靠性及读写性能做了不同的权衡。实际工作中根据自己的业务需求选择不同的RAID方案。

2 RAID的实现方式

外接式磁盘阵列:通过扩展卡提供适配能力内接式RAID:主板集成RAID控制器安装OS前在BIOS里配置软件RAID:通过OS实现

3 标准的RAID

3.1 RAID0

RAID0称为条带化存储,将数据分段存储在各个磁盘中,读写均可以并行处理,因此读写速率为单个磁盘的N倍,没有冗余功能,任何一个磁盘的损坏就会导致的数据不可用。

linux磁盘管理软RAID的实现原理分析和方法分享

3.2 RAID1

RADI1是镜像存储,没有数据校验,数据被同等的写入到2个或者多个磁盘中,写入速度相对慢, 但是读取速度比较快。

linux磁盘管理软RAID的实现原理分析和方法分享

3.3 RAID 4

RADI4在RAID1的基础上,N个盘用于数据存储,另外加入了1个磁盘作为校验盘。一共N+1个盘,任何一个盘坏掉也不影响数据的访问

3.4 RAID 5

RAID5在RAID4的基础上,由原来的一个盘来存储校验数据,改为每个盘都有数据和校验信息的。

linux磁盘管理软RAID的实现原理分析和方法分享

4 混合RAID

4.1 RAID01

先组成RAID0,然后组成RAID1.

linux磁盘管理软RAID的实现原理分析和方法分享

4.2 RAID10

先组成RAID1,然后组成RAID0

linux磁盘管理软RAID的实现原理分析和方法分享

5 软RAID的实现

5.1 RAID5的实现

创建由三块硬盘组成的可用空间为2G的RAID5设备,要求其chunk大小为256k,文件系统为ext4,开机可自动挂载至/mydata目录

5.1.1 先看看我们的磁盘情况

[root@centos7 Bash]$ lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 200G 0 disk 
├─sda1 8:1 0 1G 0 part /boot
├─sda2 8:2 0 128G 0 part 
├─sda3 8:3 0 48.8G 0 part /
├─sda4 8:4 0 512B 0 part 
└─sda5 8:5 0 19.5G 0 part /app
sdb 8:16 0 100G 0 disk 
sdc 8:32 0 20G 0 disk 
sdd 8:48 0 20G 0 disk 
sde 8:64 0 20G 0 disk 
sdf 8:80 0 20G 0 disk 
sr0 11:0 1 8.1G 0 rom /run/media/root/CentOS 7 x86_64 

这里我们使用sdb,sdc,sdd,每个盘创建一个主分区1G,构建RADI5.

5.1.2 根据实际情况分区

[root@centos7 Bash]$ fdisk /dev/sdb
Welcome to fdisk (util-linux 2.23.2).

Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.

Device does not contain a recognized partition table
Building a new DOS disklabel with disk identifier 0x93d380cf.

Command (m for help): n
Partition type:
 p primary (0 primary, 0 extended, 4 free)
 e extended
Select (default p): p
Partition number (1-4, default 1): 
First sector (2048-209715199, default 2048): 
Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-209715199, default 209715199): +1G
Partition 1 of type Linux and of size 1 GiB is set

Command (m for help): t
Selected partition 1
Hex code (type L to list all codes): fd
Changed type of partition 'Linux' to 'Linux raid autodetect'

Command (m for help): p

Disk /dev/sdb: 107.4 GB, 107374182400 bytes, 209715200 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x93d380cf

 Device Boot Start  End Blocks Id System
/dev/sdb1  2048 2099199 1048576 fd Linux raid autodetect

Command (m for help): w
The partition table has been altered!

Calling ioctl() to re-read partition table.
Syncing disks.
[root@centos7 Bash]$ fdisk /dev/sdc
Welcome to fdisk (util-linux 2.23.2).

Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.

Device does not contain a recognized partition table
Building a new DOS disklabel with disk identifier 0xc56b90d8.

Command (m for help): n
Partition type:
 p primary (0 primary, 0 extended, 4 free)
 e extended
Select (default p): p
Partition number (1-4, default 1): 
First sector (2048-41943039, default 2048): 
Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-41943039, default 41943039): +1G
Partition 1 of type Linux and of size 1 GiB is set

Command (m for help): t
Selected partition 1
Hex code (type L to list all codes): fd
Changed type of partition 'Linux' to 'Linux raid autodetect'

Command (m for help): p

Disk /dev/sdc: 21.5 GB, 21474836480 bytes, 41943040 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0xc56b90d8

 Device Boot Start  End Blocks Id System
/dev/sdc1  2048 2099199 1048576 fd Linux raid autodetect

Command (m for help): w
The partition table has been altered!

Calling ioctl() to re-read partition table.
Syncing disks.
[root@centos7 Bash]$ fdisk /dev/sdd
Welcome to fdisk (util-linux 2.23.2).

Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.

Device does not contain a recognized partition table
Building a new DOS disklabel with disk identifier 0x7e0900d8.

Command (m for help): n
Partition type:
 p primary (0 primary, 0 extended, 4 free)
 e extended
Select (default p): p
Partition number (1-4, default 1): 
First sector (2048-41943039, default 2048): 
Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-41943039, default 41943039): +1G
Partition 1 of type Linux and of size 1 GiB is set

Command (m for help): p

Disk /dev/sdd: 21.5 GB, 21474836480 bytes, 41943040 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x7e0900d8

 Device Boot Start  End Blocks Id System
/dev/sdd1  2048 2099199 1048576 83 Linux

Command (m for help): t
Selected partition 1
Hex code (type L to list all codes): fd
Changed type of partition 'Linux' to 'Linux raid autodetect'

Command (m for help): w
The partition table has been altered!

Calling ioctl() to re-read partition table.
Syncing disks.

5.1.3 创建raid

[root@centos7 Bash]$ mdadm -C /dev/md5 -a yes -l 5 -n 3 /dev/sd{b1,c1,d1} -c 256 # -C指定创建, -a yes 自动创建设备 , -l 设定level , -n 设定磁盘个数, -c chunk大小
Continue creating array"cnblogs_code">
[root@centos7 md5]$ mdadm -D /dev/md5       #查看详细raid5详细信息,可以发现有3个都是working状态的
/dev/md5:
Version : 1.2
Creation Time : Wed Dec 6 19:28:22 2017
Raid Level : raid5
Array Size : 2095104 (2046.00 MiB 2145.39 MB)
Used Dev Size : 1047552 (1023.00 MiB 1072.69 MB)
Raid Devices : 3
Total Devices : 3
Persistence : Superblock is persistent

Update Time : Wed Dec 6 19:39:06 2017
State : clean 
Active Devices : 3
Working Devices : 3
Failed Devices : 0
Spare Devices : 0

Layout : left-symmetric
Chunk Size : 256K

Consistency Policy : resync
Name : centos7.magedu.com:5 (local to host centos7.magedu.com)
UUID : 2c8ae60d:a799fcb7:9008a046:ae6ea430
Events : 18

Number Major Minor RaidDevice State
 0 8 17 0 active sync /dev/sdb1
 1 8 33 1 active sync /dev/sdc1
 3 8 49 2 active sync /dev/sdd1
[root@centos7 md5]$ man mdadm
[root@centos7 md5]$ mdadm /dev/md5 -f /dev/sdc1       # -f 设定指定设备故障, 将/dev/sdc1 这个盘标记失败, 看是否数据能访问,我这里使用-f标记失败,工作中可以根据硬盘指示灯判断磁盘状态
mdadm: set /dev/sdc1 faulty in /dev/md5  
[root@centos7 md5]$ mdadm -D /dev/md5        #在次查看信息,发现工作的是2个, 一个失败的设备 
/dev/md5:
Version : 1.2
Creation Time : Wed Dec 6 19:28:22 2017
Raid Level : raid5
Array Size : 2095104 (2046.00 MiB 2145.39 MB)
Used Dev Size : 1047552 (1023.00 MiB 1072.69 MB)
Raid Devices : 3
Total Devices : 3
Persistence : Superblock is persistent

Update Time : Wed Dec 6 19:41:08 2017
State : clean, degraded        # 这里注意了。 我们的一个盘坏掉了。 raid5状态为降级使用了。
Active Devices : 2
Working Devices : 2
Failed Devices : 1
Spare Devices : 0

Layout : left-symmetric
Chunk Size : 256K

Consistency Policy : resync
Name : centos7.magedu.com:5 (local to host centos7.magedu.com)
UUID : 2c8ae60d:a799fcb7:9008a046:ae6ea430
Events : 20

Number Major Minor RaidDevice State
0 8 17 0 active sync /dev/sdb1
- 0 0 1 removed
3 8 49 2 active sync /dev/sdd1
1 8 33 - faulty /dev/sdc1
[root@centos7 md5]$ cat a.txt      # 发现我们的数据还是能访问的。没有问题。

5.1.5 替换设备

我这里是磁盘坏掉后的执行替换的, 完全可以多一个备用盘, 坏掉自动替换的。

[root@centos7 md5]$ mdadm /dev/md5 -a /dev/sde1   # 上面我们的sdc1数据损坏,我们需要更换新的磁盘来顶替他的位置。这里添加一个sde1的磁盘, fdisk操作这里省去了。
mdadm: added /dev/sde1
[root@centos7 md5]$ mdadm -Ds      # 查看详细信息
ARRAY /dev/md5 metadata=1.2 name=centos7.magedu.com:5 UUID=2c8ae60d:a799fcb7:9008a046:ae6ea430
[root@centos7 md5]$ mdadm -D /dev/md5     # 查看详细信息
/dev/md5:
Version : 1.2
Creation Time : Wed Dec 6 19:28:22 2017
Raid Level : raid5
Array Size : 2095104 (2046.00 MiB 2145.39 MB)
Used Dev Size : 1047552 (1023.00 MiB 1072.69 MB)
Raid Devices : 3
Total Devices : 4
Persistence : Superblock is persistent

Update Time : Wed Dec 6 19:50:01 2017
State : clean       # 状态恢复正常了。没有问题
Active Devices : 3
Working Devices : 3
Failed Devices : 1
Spare Devices : 0

Layout : left-symmetric
Chunk Size : 256K

Consistency Policy : resync
Name : centos7.magedu.com:5 (local to host centos7.magedu.com)
UUID : 2c8ae60d:a799fcb7:9008a046:ae6ea430
Events : 43

Number Major Minor RaidDevice State
0 8 17 0 active sync /dev/sdb1
4 8 65 1 active sync /dev/sde1
3 8 49 2 active sync /dev/sdd1

1 8 33 - faulty /dev/sdc1  # 这个盘是坏掉的,我们已经加入了新的磁盘, 这个盘可以干掉了
[root@centos7 md5]$ man mdadm
[root@centos7 md5]$ mdadm /dev/md5 --remove /dev/sdc1   # 这个盘我们从raid5中移除去。 
mdadm: hot removed /dev/sdc1 from /dev/md5

5.1.6扩展raid

我们上面使用的是2+1构成的raid5,磁盘利用率为66%,如果我们想改成3+1 可以执行类似如下命令

[root@centos7 mnt]$ mkadm -G -r /dev/md5 -n 4 -a /dev/sdxx   # 这里我就不测试了。使用/dev/sdxx代替一个设备。-G 是Grown增长的意思,-r 是resizefs的意思,

5.1.7 清空raid信息

[root@centos7 mnt]$ umount /dev/md5     # 卸载设备
[root@centos7 mnt]$ mdadm -S /dev/md5     # 停止raid5 
mdadm: stopped /dev/md5
[root@centos7 mnt]$ sed -i '$d' /etc/fstab    # 删除fstab中关于raid5挂载的行
[root@centos7 mnt]$ cat /etc/fstab     # 确保fstab没有大问题

#
# /etc/fstab
# Created by anaconda on Tue Nov 7 16:07:01 2017
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
#

UUID=59ccea87-3c4e-4bbc-9e2f-3fadb1dcf2e6 /   ext4 defaults 1 1
UUID=f4e867e8-bcde-43a2-adc7-c80b0948e85f /app   ext4 noatime,usrquota,grpquota 1 2
UUID=1d6cbe88-ffb4-4adf-bacf-76be1fa75708 /boot   ext4 defaults 1 2
#UUID=b2c064f5-1ee5-4b5c-9e75-ed41cb99c5aa swap   swap defaults 0 0
#UUID=a0516c4f-40e6-4919-905a-8b44db12ff7b swap  swap defaults,pri=0 0 0 
#/dev/sdb2 /test ext4 rw,seclabel,relatime,data=ordered 0 0
#/dev/sdb1 /home xfs rw,seclabel,relatime,attr2,inode64,usrquota,grpquota 0 0
[root@centos7 mnt]$ rm -rf /etc/mdadm.conf     # 删除raid默认配置文件
[root@centos7 mnt]$ mdadm --zero-superblock /dev/sd{b1,e1,d1,c1}  # 清空设置上的超级块信息

5.2 RAID10的实现

raid10 ,6个分区,2个一组raid1,3组raid0

5.2.1 案例分析

分析下,我们创建一个raid10设置,2个设备组成一个raid1,6个设备2个一组可以组成3个raid1, 然后把3个raid1组成一个raid0即可

5.2.2 先创建6个设备

[root@centos7 mnt]$ lsblk    # 就是使用fdisk 创建的设备, 具体这里就不写了。 最终使用lsblk显示,我们可以看到sdb1,sdb2,sdd1,sde1一共6个磁盘
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 200G 0 disk 
├─sda1 8:1 0 1G 0 part /boot
├─sda2 8:2 0 128G 0 part 
├─sda3 8:3 0 48.8G 0 part /
├─sda4 8:4 0 512B 0 part 
└─sda5 8:5 0 19.5G 0 part /app
sdb 8:16 0 100G 0 disk 
├─sdb1 8:17 0 1G 0 part 
└─sdb2 8:18 0 1G 0 part 
sdc 8:32 0 20G 0 disk 
├─sdc1 8:33 0 1G 0 part 
└─sdc2 8:34 0 1G 0 part 
sdd 8:48 0 20G 0 disk 
└─sdd1 8:49 0 1G 0 part 
sde 8:64 0 20G 0 disk 
└─sde1 8:65 0 1G 0 part 
sdf 8:80 0 20G 0 disk 
sr0 11:0 1 8.1G 0 rom /run/media/root/CentOS 7 x86_64

5.2.3 创建raid

[root@centos7 mnt]$ mdadm -C /dev/md11 -a yes -l 1 -n 2 /dev/sd{b1,c1}    # 创建第一个raid1
mdadm: /dev/sdb1 appears to be part of a raid array:
 level=raid5 devices=3 ctime=Wed Dec 6 19:28:22 2017
mdadm: Note: this array has metadata at the start and
 may not be suitable as a boot device. If you plan to
 store '/boot' on this device please ensure that
 your boot-loader understands md/v1.x metadata, or use
 --metadata=0.90
mdadm: /dev/sdc1 appears to be part of a raid array:
 level=raid5 devices=3 ctime=Wed Dec 6 19:28:22 2017
Continue creating array"cnblogs_code">
[root@centos7 mnt]$ umount /dev/md10         # 取消挂载
[root@centos7 mnt]$ rm -rf /etc/mdadm.conf        # 删除mdadm的默认配置
[root@centos7 mnt]$ mdadm -S /dev/md10         # 停止raid0设置
mdadm: stopped /dev/md10
[root@centos7 mnt]$ mdadm -S /dev/md11         # 停止raid1设置
mdadm: stopped /dev/md11
[root@centos7 mnt]$ mdadm -S /dev/md12         # 停止radi1 设置
mdadm: stopped /dev/md12 
[root@centos7 mnt]$ mdadm -S /dev/md13         # 停止raid 1 设置
mdadm: stopped /dev/md13
[root@centos7 mnt]$ sed -i '$d' /etc/fstab        # 删除fstab的挂载 
[root@centos7 mnt]$ cat /etc/fstab         # 确保正确

#
# /etc/fstab
# Created by anaconda on Tue Nov 7 16:07:01 2017
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
#

UUID=59ccea87-3c4e-4bbc-9e2f-3fadb1dcf2e6 /   ext4 defaults 1 1
UUID=f4e867e8-bcde-43a2-adc7-c80b0948e85f /app   ext4 noatime,usrquota,grpquota 1 2
UUID=1d6cbe88-ffb4-4adf-bacf-76be1fa75708 /boot   ext4 defaults 1 2
#UUID=b2c064f5-1ee5-4b5c-9e75-ed41cb99c5aa swap   swap defaults 0 0
#UUID=a0516c4f-40e6-4919-905a-8b44db12ff7b swap  swap defaults,pri=0 0 0 
#/dev/sdb2 /test ext4 rw,seclabel,relatime,data=ordered 0 0
#/dev/sdb1 /home xfs rw,seclabel,relatime,attr2,inode64,usrquota,grpquota 0 0
[root@centos7 mnt]$ mdadm -D           # 再次查看下mdadm信息,确保没有了
mdadm: No devices given.
[root@centos7 mnt]$ mdadm --zero-superblock /dev/sd{b1,b2,c1,c2,d1,e1} # 请求md的元数据信息