神剑山庄资源网 Design By www.hcban.com
第一种：
1、添加关键头文件：
#include <linux/of_gpio.h> #include <linux/gpio.h> #include <linux/delay.h> #include <linux/module.h> #include <linux/types.h> #include <linux/kobject.h>
2、在已经存在驱动文件中搜索"DEVICE_ATTR"关键字，如果存在，直接参考已经存在的方法添加一个即可，如下：
unsigned int Gpio134_OtgID = 134; //定义全局变量 static unsigned int otgid_status = 1; …
3、定义文件系统的读写函数：
//add zhaojr gpio134 control OTG ID for host or device mode
static ssize_t setotgid_store(struct device *dev, struct device_attribute *attr,const char *buf, size_t count)
{
unsigned int ret=0;
pr_err("%s: \n", __func__);
//ret = kstrtoint(buf, 10, &otgid_status);
ret = kstrtouint(buf, 10, &otgid_status);
//sscanf(buf, "%lu", &otgid_status);
if (ret < 0){
pr_err("%s::kstrtouint() failed \n", __func__);
}
//sscanf(buf, "%d", &otgid_status);
pr_err("%s: otgid_status=%d \n", __func__,otgid_status);
if(otgid_status > 0){
gpio_set_value(Gpio134_OtgID, 1);
}else{
gpio_set_value(Gpio134_OtgID, 0);
}
return count;
}
static ssize_t setotgid_show(struct device *dev,struct device_attribute *attr, char *buf)
{
pr_err("%s: \n", __func__);
return sprintf(buf, "%d\n",otgid_status);
}
//static DEVICE_ATTR_RW(setotgid);
/*struct device_attribute dev_attr_setotgid = {
.attr = {.name ="setotgid",
.mode = 0664},
.show = setotgid_show,
.store = setotgid_store,
};*/
//setotgid的一致性，第一个参数setotgid和setotgid_show、setotgid_store前钻必须保持一致
static DEVICE_ATTR(setotgid, 0664, setotgid_show, setotgid_store);
//end zhaojr add
static struct device_attribute *android_usb_attributes[] = {
&dev_attr_state,
&dev_attr_setotgid, //setotgid跟DEVICE_ATTR定义的name必须保持一致
NULL
};
4、在probe()函数中定义针对具体GPIO管脚的请求和初始化
static int mdss_mdp_probe(struct platform_device *pdev)
{
....................................................................................
//zhaojr add for gpio134 to usb host or device mode
ret_status=gpio_request(Gpio134_OtgID, "Gpio134-OtgID");
if(ret_status<0){
pr_err("usb gadget configfs %s::Gpio134_OtgID gpio_request failed\n",__func__);
}
pr_err("android_device_create()::Gpio134_OtgID gpio_request OK\n");
gpio_direction_output(Gpio134_OtgID,1);
if(otgid_status > 0){ //有自定义初始化状态就添加上这个判断，没有就不需要添加if else操作
pr_err("%s-Gpio134_OtgID pin set 1\n", __func__);
gpio_set_value(Gpio134_OtgID, 1);
//msleep(5);
}else{
pr_err("%s-Gpio134_OtgID pin set 0\n", __func__);
gpio_set_value(Gpio134_OtgID, 0);
//msleep(5);
}
//end zhaojr add
................................................................
}
5、在remove()函数中添加资源的释放
static int mdss_mdp_remove(struct platform_device *pdev)
{
struct mdss_data_type *mdata = platform_get_drvdata(pdev);
if (!mdata)
return -ENODEV;
pr_err("%s\n", __func__);
gpio_free(Gpio134_OtgID); //zhaojr add free gpio otgid pin
........................................................
}
第二种方法：
在要添加驱动文件中没有搜索"DEVICE_ATTR"关键字的情况，如添加音频功放打开和关闭的控制接口：
1、添加关键头文件：
#include <linux/of_gpio.h> #include <linux/gpio.h> #include <linux/delay.h> #include <linux/module.h> #include <linux/types.h> #include <linux/kobject.h>
2、定义全局变量和定义打开和关闭的接口并组织属性数组：
// add zhaojr gpio63 for close or speaker pa enable
struct kobject *spk_pa_kobj = NULL;
unsigned int gpio63_spk_pa_gpio; //for speaker pa ic enable
//extern unsigned int gpio63_spk_pa_gpio;
static unsigned int SpkPa_Gpio_Enable = 0;
static ssize_t spkpaon_store(struct device *dev, struct device_attribute *attr,const char *buf, size_t count)
{
unsigned int ret=0;
//ret = kstrtoint(buf, 10, &backlight_enable);
ret = kstrtouint(buf, 10, &SpkPa_Gpio_Enable);
if (ret < 0){
pr_err("%s::kstrtouint() failed \n", __func__);
}
pr_err("%s: SpkPa_Gpio_Enable=%d \n", __func__,SpkPa_Gpio_Enable);
if(SpkPa_Gpio_Enable > 0){
//gpio_set_value(gpio63_spk_pa_gpio, 1);
pr_err("%s: gpio_set_value gpio63 speaker pa enable \n", __func__);
//功放打开的时序
gpio_set_value(gpio63_spk_pa_gpio,0);
udelay(8);
gpio_set_value(gpio63_spk_pa_gpio,1);
udelay(8);
gpio_set_value(gpio63_spk_pa_gpio,0);
udelay(8);
gpio_set_value(gpio63_spk_pa_gpio,1);
//sdm660_cdc->ext_spk_pa_set = true;
}else{
pr_err("%s: gpio_set_value gpio63 speaker pa disable \n", __func__);
//功放关闭的时序
gpio_set_value(gpio63_spk_pa_gpio,0);
udelay(600);
//sdm660_cdc->ext_spk_pa_set = false;
}
return count;
}
static ssize_t spkpaon_show(struct device *dev,struct device_attribute *attr, char *buf)
{
return sprintf(buf, "%d\n",SpkPa_Gpio_Enable);
}
static DEVICE_ATTR(spkpaon, 0664, spkpaon_show, spkpaon_store);
static struct attribute *spkpa_attributes[] = {
&dev_attr_spkpaon.attr,
NULL
};
static const struct attribute_group apkpa_attr_group = {
.attrs = spkpa_attributes,
NULL
};
//end zhaojr add
3、在probe()函数中添加文件系统属性接口的注册：
在注册的时候并不需要对功放进行初始化，所以probe()函数中并没有对sdm660_cdc->spk_pa_gpio(GPIO63)，只操作了请求。具体的请求操作请参考：msm8953 audio部分的EAR和Speaker输出的声音配置中的音频部分的
vendor/qcom/opensource/audio-kernel/asoc/codecs/sdm660_cdc/msm-analog-cdc.c文件操作
static int msm_anlg_cdc_probe(struct platform_device *pdev)
{
int ret = 0;
struct sdm660_cdc_priv *sdm660_cdc = NULL;
struct sdm660_cdc_pdata *pdata;
int adsp_state;
..................................
dev_set_drvdata(&pdev->dev, sdm660_cdc);
//kangting add
sdm660_cdc->spk_pa_gpio = of_get_named_gpio(pdev->dev.of_node, "qcom,speaker-pa", 0);
if (!gpio_is_valid(sdm660_cdc->spk_pa_gpio))
pr_err("%s, sdm660_cdc->spk_pa_gpio not specified\n",__func__);
else{
pr_err("%s, sdm660_cdc->spk_pa_gpio is %d\n",__func__,sdm660_cdc->spk_pa_gpio);
ret = gpio_request(sdm660_cdc->spk_pa_gpio, "spk_pa");
if (ret) {
pr_err("request spk_pa_gpio failed, ret=%d\n",ret);
gpio_free(sdm660_cdc->spk_pa_gpio);
}
}
//kangting end
ret = snd_soc_register_codec(&pdev->dev,
&soc_codec_dev_sdm660_cdc,
msm_anlg_cdc_i2s_dai,
ARRAY_SIZE(msm_anlg_cdc_i2s_dai));
if (ret) {
dev_err(&pdev->dev,
"%s:snd_soc_register_codec failed with error %d\n",
__func__, ret);
goto err_supplies;
}
BLOCKING_INIT_NOTIFIER_HEAD(&sdm660_cdc->notifier);
BLOCKING_INIT_NOTIFIER_HEAD(&sdm660_cdc->notifier_mbhc);
//add by zhaojr
gpio63_spk_pa_gpio = sdm660_cdc->spk_pa_gpio; //将设备树种定义的IO口号获取进来
spk_pa_kobj = kobject_create_and_add("spk_pa", NULL); //创建/sys/spk_pa/目录
ret = sysfs_create_group(spk_pa_kobj, &apkpa_attr_group); //创建/sys/class/spk_pa/spkpaon节点
if (ret)
dev_err(&pdev->dev,"%s:sysfs_create_group failed with error\n",__func__);
//end zhaojr add
....................................
4、在remove函数中释放资源
static int msm_anlg_cdc_remove(struct platform_device *pdev)
{
struct sdm660_cdc_priv *sdm660_cdc = dev_get_drvdata(&pdev->dev);
struct sdm660_cdc_pdata *pdata = sdm660_cdc->dev->platform_data;
int count;
//add by zhaojr //释放资源
gpio_free(sdm660_cdc->spk_pa_gpio);
kobject_put(spk_pa_kobj); //关键函数
sysfs_remove_group(spk_pa_kobj, &apkpa_attr_group); //关键函数
//end zhaojr add
for (count = 0; count < sdm660_cdc->child_count &&
count < ANLG_CDC_CHILD_DEVICES_MAX; count++)
platform_device_unregister(
sdm660_cdc->pdev_child_devices[count]);
snd_soc_unregister_codec(&pdev->dev);
msm_anlg_cdc_disable_supplies(sdm660_cdc, pdata);
wcd9xxx_spmi_irq_exit();
devm_kfree(&pdev->dev, sdm660_cdc);
return 0;
}
总结
神剑山庄资源网 Design By www.hcban.com
神剑山庄资源网
免责声明：本站文章均来自网站采集或用户投稿，网站不提供任何软件下载或自行开发的软件！
如有用户或公司发现本站内容信息存在侵权行为，请邮件告知！ 858582#qq.com
神剑山庄资源网 Design By www.hcban.com
暂无解析linux或android添加文件系统的属性接口的方法的评论...
更新日志
2024年11月15日
2024年11月15日
- 黄乙玲1988-无稳定的爱心肝乱糟糟[日本东芝1M版][WAV+CUE]
- 群星《我们的歌第六季 第3期》[320K/MP3][70.68MB]
- 群星《我们的歌第六季 第3期》[FLAC/分轨][369.48MB]
- 群星《燃！沙排少女 影视原声带》[320K/MP3][175.61MB]
- 乱斗海盗瞎6胜卡组推荐一览 深暗领域乱斗海盗瞎卡组分享
- 炉石传说乱斗6胜卡组分享一览 深暗领域乱斗6胜卡组代码推荐
- 炉石传说乱斗本周卡组合集 乱斗模式卡组最新推荐
- 佟妍.2015-七窍玲珑心【万马旦】【WAV+CUE】
- 叶振棠陈晓慧.1986-龙的心·俘虏你（2006复黑限量版）【永恒】【WAV+CUE】
- 陈慧琳.1998-爱我不爱（国）【福茂】【WAV+CUE】
- 咪咕快游豪礼放送，百元京东卡、海量欢乐豆就在咪咕咪粉节！
- 双11百吋大屏焕新“热”，海信AI画质电视成最大赢家
- 海信电视E8N Ultra：真正的百吋，不止是大！
- 曾庆瑜1990-曾庆瑜历年精选[派森][WAV+CUE]
- 叶玉卿1999-深情之选[飞图][WAV+CUE]